Health Benefits Of Household Energy Transitions

household energy consumption
Reducing exposure to indoor air pollution from household energy use can be achieved through interventions in of the following areas:

* Emissions source and energy technology (fuel– stove combination).
* Housing design and ventilation.
* Behavior and time–activity budget. (more…)

Hydropower Research and Development Focusing in Turbine Efficiency

hydropower efficiency
Up to around 1980, hydropower research and development (R&D) efforts focused mainly on improving turbine efficiency, reducing cavitations, and increasing generation. Whereas older units had efficiency ratings as low as 60%, the new units have efficiency ratings of approximately 90%. The U.S. Department of Energy (DOE) also looked at new technologies for developing low-head, ultra low-head, and small hydropower projects. These technologies included the following: (more…)

Personal Computers (PC) and Workstations Energy Consumptions

pc energy consumption
After lighting, personal computers (PC) and monitors have the highest energy use in office environments. Studies have shown that the power management of computers and monitors can significantly reduce the energy consumption per capita, saving hundreds or thousands of dollars per year in electricity costs. The energy consumption of computers and monitors will be needed by the amount of energy to work and how they are used is determined.

The installed base of approximately 71 million personal computers and 2.5 million workstations in 2000 consumed 17.4 and 1.8 TWh, respectively. (more…)

Peak Electricity Demand Impact and Reducing Power Needs During Peak Periods

Peak Electricity Demand
Power generation and distribution networks are built with spare capacity to meet peak periods of energy consumption is usually a time when demand for heating and / or cooling is particularly acute accommodate. Normally, peak electricity demand in some cases last just a few hours every year. And while the networks have always had to cope with peaks in recent years, the electricity consumption during peak hours has increased dramatically in the afternoon. (more…)

Chemical Pulp Paper Production

More than 48% of the raw material fiber used for paper production (chemical pulp or mechanical pulp) in the United States in 2002 was recovered or reclaimed, with recovered paper contributing 37.7% and wood residues 10.6%. The total has been more or less constant, with the percentage of recovered paper increasing and that of wood residues declining recently due to their increased use in oriented strand board and composite panels. Primary fibers are a renewable, domestic resource, much of which is currently supplied by tree plantations. Short-rotation forestry can be used to further increase the productivity of these plantations. (more…)

Renewable Energy Sources in Europe: Geothermal, Wind Energy, Biomass

In Europe, modern renewable energy sources technologies were explored thoroughly for the first time after the oil embargo/ price crisis of 1973. Notably, market introduction of renewable energy technology started in about 1985, but the renewable energy sources industry has become vital only during the past decade. Accordingly, relevant statistical renewable energy sources data have been systematically compiled only over the past decade, although reliable and consistent statistical renewable energy sources data, collected since 1989, exist for all 15 countries of the European Union and for Western Europe (defined here as the EU-15 plus Switzerland, Norway, and Iceland). (more…)

Well-to-Pump Energy Efficiencies

Well-to-Pump
The energy efficiencies of various fuel production pathways from well to pump. The efficiencies shown are defined as the energy in a given fuel (available at pumps in vehicle refueling stations) divided by total energy inputs during all Well-to-Pump activities, including the energy content of the fuel. One way to interpret the Well-to-Pump efficiencies in the figure is as the difference between 100% and the energy efficiencies, which roughly represent energy losses during Well-to-Pump stages for making a given fuel available at the pump. As stated in Section 3, Well-to-Pump activities include biomass feedstock production; feedstock transportation and storage; fuel production; and fuel transportation, storage, and distribution. (more…)

Different Forms of Energy and Different Forms of Energy

Different Forms of Energy
Energy exists in many forms. Some of energy forms are simple to use and identify as energy. But other forms of energy can not be seen until the energy released. Some forms of energy like light and sound, they carry energy from one place to another. There are also vibrating objects that carry the kinetic energy that makes the sound. The energy passes through the wave where the wave was originated. The higher the wave, it gives more energy. Light is also one form of energy. A light beam or light ray brings out energy from where there was light. This energy is often referred to as radiation energy. (more…)

Maglev Technology For High-Speed Transportation

High-speed maglev technology offers four main advantages: non-contact operation; low-mass vehicles (on a per seat basis, maglev vehicles weigh approximately one-third to three-quarters as much as high speed trains); high speed; and wayside system control and self-propelled vehicles (each car contains its own secondary part of a linear synchronous motors).

Non-contact operation means that vehicle traction does not depend on adhesion between contact surfaces, e.g., wheels and rails. (more…)

Hybrid Electric Cars: Cutting Emissions and Improving Fuel Efficiency

hybrid electric cars
It is a rare company prospectus that begins with a quotation from Goethe: “Whatever you can do, or dream you can, begin it. Boldness has genius, power, and magic in it.” But Lovins is not a normal entrepreneur, as anyone who has met this eccentric and disheveled but unmistakably visionary thinker knows. The founder of the Rocky Mountain Institute, a leading green think tank based in Old Snowmass, Colorado, thinks the car industry’s incremental approach to cutting emissions and improving fuel efficiency will never amount to much. He wants a complete redesign of the automobile, from the bottom up, and intends to show the big boys how it should be done. (more…)

Next Page »