Peak Electricity Demand Impact and Reducing Power Needs During Peak Periods

Peak Electricity Demand
Power generation and distribution networks are built with spare capacity to meet peak periods of energy consumption is usually a time when demand for heating and / or cooling is particularly acute accommodate. Normally, peak electricity demand in some cases last just a few hours every year. And while the networks have always had to cope with peaks in recent years, the electricity consumption during peak hours has increased dramatically in the afternoon. (more…)

Solutions to Energy-Related Global Warming

Addressing global warming, however, is a highly complex and daunting endeavor. Many climate experts have urged the world to stabilize greenhouse gas concentrations in the atmosphere around 450 to 550 parts per million (ppm)—that is, no more than 450 to 550 units of greenhouse gases for every million units of air in the earth’s atmosphere. This approach, experts say, could keep average global temperatures at no more than 3.6° Fahrenheit (2° Celsius) above preindustrial levels, which could avoid some of the worst, irreversible consequences of climate change. (more…)

Nuclear Power And World Electricity Generation

Sir Arthur Eddington’s general address on subatomic energy at the 1930 World Power Conference in Berlin stirred the imagination of every scientist and engineer present. The challenge was clear: find a practical means of accessing, controlling, and using the enormous energy locked in the atom as predicted by Einstein’s remarkable mass–energy relation, E=mc2. On December 2, 1942, Enrico Fermi transformed Eddington’s visionary challenge into reality by producing the world’s first controlled, self-sustaining nuclear reactor, Chicago Pile 1. Six decades later, nuclear energy now produces 16% of the world’s electrical power. (more…)

Renewable Energy Sources in Europe: Geothermal, Wind Energy, Biomass

In Europe, modern renewable energy sources technologies were explored thoroughly for the first time after the oil embargo/ price crisis of 1973. Notably, market introduction of renewable energy technology started in about 1985, but the renewable energy sources industry has become vital only during the past decade. Accordingly, relevant statistical renewable energy sources data have been systematically compiled only over the past decade, although reliable and consistent statistical renewable energy sources data, collected since 1989, exist for all 15 countries of the European Union and for Western Europe (defined here as the EU-15 plus Switzerland, Norway, and Iceland). (more…)

Well-to-Pump Energy Efficiencies

Well-to-Pump
The energy efficiencies of various fuel production pathways from well to pump. The efficiencies shown are defined as the energy in a given fuel (available at pumps in vehicle refueling stations) divided by total energy inputs during all Well-to-Pump activities, including the energy content of the fuel. One way to interpret the Well-to-Pump efficiencies in the figure is as the difference between 100% and the energy efficiencies, which roughly represent energy losses during Well-to-Pump stages for making a given fuel available at the pump. As stated in Section 3, Well-to-Pump activities include biomass feedstock production; feedstock transportation and storage; fuel production; and fuel transportation, storage, and distribution. (more…)

Different Forms of Energy and Different Forms of Energy

Different Forms of Energy
Energy exists in many forms. Some of energy forms are simple to use and identify as energy. But other forms of energy can not be seen until the energy released. Some forms of energy like light and sound, they carry energy from one place to another. There are also vibrating objects that carry the kinetic energy that makes the sound. The energy passes through the wave where the wave was originated. The higher the wave, it gives more energy. Light is also one form of energy. A light beam or light ray brings out energy from where there was light. This energy is often referred to as radiation energy. (more…)

Maglev Technology For High-Speed Transportation

High-speed maglev technology offers four main advantages: non-contact operation; low-mass vehicles (on a per seat basis, maglev vehicles weigh approximately one-third to three-quarters as much as high speed trains); high speed; and wayside system control and self-propelled vehicles (each car contains its own secondary part of a linear synchronous motors).

Non-contact operation means that vehicle traction does not depend on adhesion between contact surfaces, e.g., wheels and rails. (more…)

Hybrid Electric Cars: Cutting Emissions and Improving Fuel Efficiency

hybrid electric cars
It is a rare company prospectus that begins with a quotation from Goethe: “Whatever you can do, or dream you can, begin it. Boldness has genius, power, and magic in it.” But Lovins is not a normal entrepreneur, as anyone who has met this eccentric and disheveled but unmistakably visionary thinker knows. The founder of the Rocky Mountain Institute, a leading green think tank based in Old Snowmass, Colorado, thinks the car industry’s incremental approach to cutting emissions and improving fuel efficiency will never amount to much. He wants a complete redesign of the automobile, from the bottom up, and intends to show the big boys how it should be done. (more…)

The Role Of Nuclear Energy In Reducing Security Of Supply Risk

nuclear energy supply
Nuclear energy has some distinct advantages in strengthening the external dimension of energy supply security. These include:

Nuclear power plants produce electricity domestically. Their capital and labor inputs are also provided domestically. With more than 90% of its inputs in terms of value sourced domestically, it can be considered a largely domestic source of energy and electricity.

• Of course, a majority of OECD countries import part or all of their requirements of uranium plutonium. (more…)

Sulfur Gasoline as Source of Automotive Emissions

In recent years, there has been a greater understanding of the role of automotive emissions as environmental pollutants. Sulfur dioxide, nitrogen oxides, and carbon monoxide degrade the earth’s atmosphere and are health hazards. Carbon dioxide adds to the atmospheric buildup of greenhouse gases and in turn accelerates the process of global warming. (more…)

Next Page »