Power generation and distribution networks are built with spare capacity to meet peak periods of energy consumption is usually a time when demand for heating and / or cooling is particularly acute accommodate. Normally, peak electricity demand in some cases last just a few hours every year. And while the networks have always had to cope with peaks in recent years, the electricity consumption during peak hours has increased dramatically in the afternoon. (more…)

Imprinted on every batt or blanket of insulation or on every bag of loose insulation is its R-Value. The higher Insulation R-Value, the more insulation value you’re getting, and the more money you’re saving. (Maybe instead of rating insulating material R-3 and R-4 and R-5, it would be more graphic to rate it with dollar signs: $–3, $–4, $–5.) (more…)

A combination of legislation and technology has helped clean up many of the world’s coal-burning plants. Both developed and developing countries have adopted increasingly stringent environmental regulations to govern emissions from coal-fired power plants. In the United States, all coal-fired power plants built after 1978 must be equipped with postcombustion cleanup devices to capture pollutants before they escape into the atmosphere. Cyclones, baghouses, and electrostatic precipitators filter out nearly 99% of the particulates. Flue gas scrubbers use a slurry of crushed limestone and water to absorb sulfur oxides from flue gas. The limestone reacts with the sulfur dioxide to form calcium sulfate, which may be used to produce wallboard. Staged combustion and low-NOx burners are used to burn coal to minimize NOx formation. Another strategy, selective catalytic reduction, reacts ammonia with NOx over a catalyst to produce nonpolluting nitrogen and water vapor.

Conventional coal-fired power plants capture pollutants from the flue gas after it leaves the boiler. Circulating fluidized bed (CFB) combustors capture most of the pollutants before they leave the furnace. Crushed coal particles and limestone circulate inside the CFB combustor, suspended by an upward flow of hot air. Sulfur oxides released during combustion are absorbed by the limestone, forming calcium sulfate, which drops to the bottom of the boiler. The CFB combustor operates at a lower temperature (14001F) compared to pulverized coal (PC) boilers (27001F), which also helps reduce the formation of NO x .

Precombustion coal cleaning is another strategy to reduce sulfur emissions by cleaning the coal before it arrives at the power plant. Sulfur in coal is present as pyrite (FeS2 ), which is physically bound to the coal as tiny mineral inclusions, and as ‘‘organic sulfur,’’ which is chemically bound to the carbon and other atoms in coal. Pyrite is removed in a coal preparation plant, where coal is crushed into particles less than 2 inches in size and is washed in a variety of devices that perform gravity-based separations. Clean coal floats to the surface, whereas pyrite and other mineral impurities sink. Additional cleaning may be performed with flotation cells, which separate coal dust from its impurities based on differences in surface properties. Precombustion removal of organic sulfur can be accomplished only by chemical cleaning. So far, coal combustion emissions and chemical cleaning has proved to be too costly, thus flue gas scrubbers are often required to achieve near-complete removal of sulfur pollutants.

The tightening of environmental regulations is likely to continue throughout the world. In the United States, for example, by December 2008, it is anticipated that coal-fired power plants will have to comply with maximum emission levels for mercury. Emissions of mercury and other trace metals, such as selenium, are under increasing scrutiny of coal combustion emissions because of suspected adverse effects on public health.

Coal is sometimes combusted with waste material as a combined waste reduction/electricity production strategy. The disposal of waste from agriculture and forestry (biomass), municipalities, and hospitals becomes costly when landfill space is limited. Some wastes, particularly biomass feedstock, are combustible, but their low energy density (compared with coal) limits their use as an electricity production fuel. Blending coal with these fuels provides an economical method to produce electric power, reduce waste, and decrease coal plant emissions. Most wood wastes, compared to coal, contain less fuel nitrogen and burn at lower temperatures. These characteristics lead to lower NO x formation. In addition, wood contains minimal sulfur ( o 0.1% by weight) and thus reduces the load on scrubbers and decreases scrubber waste biomass.

Numerous electric utilities have demonstrated that 1–8% of woody drying biomass can be blended with coal with no operational problems. Higher blends may also be used, but require burner and feed intake modifications as well as a separate feed system for the waste fuel. Cofiring in fluidized bed boilers may avoid some of these drawbacks, but the economics of co-firing are not yet sufficiently attractive to make it a widespread practice.

At present, in the United States and worldwide, motor vehicles are fueled almost exclusively by petroleum based gasoline (or reformulated gasoline) and diesel fuels. Since the first oil price shock in 1973, efforts have been made to seek alternative fuels to displace gasoline and diesel fuels and achieve energy and environmental benefits. Some of the alternative fuels that have been researched and used are liquefied petroleum gas (LPG), compressed natural gas (CNG), liquefied natural gas (LNG), methanol (MeOH), dimethyl ether (DME), Fischer– Tropsch diesel (FTD), hydrogen (H 2 ), ethanol (EtOH), biodiesel, and electricity. Production processes associated with gasoline, diesel, and each of these alternative fuels differ. (more…)

Global warming, CO2 emissions, deforestation and loss of biodiversity on the planet are just side effects of our carbon footprint. Like hundreds of organizations to develop initiatives to reduce the effects of human energy consumption, others have simply chosen to ignore the movement. If you want to help Mother Earth, there are ten top list ways to waste of energy that you can avoid: (more…)

Austria - Greenpeace was invited by the Austrian authorities to fly the flag in a nuclear power plant. Zwentendorf nuclear plant was never implemented and has been off since the 70s. Today it became a new solar power station. Our banner read: “Energy Revolution = Solution to Climate Change”. (more…)

The entire concept of energy independence revolves around using the resources within a country. Simply put, it’s “Stay within your own means and stop taking help from outside”. In the United States of America, energy independence is a political agenda whereby the country would eventually, through shifts in its energy policy and technology development, approach self-sufficiency in its energy needs by producing close to the amount of energy that it consumes. If total energy possibilities are taken advantage of, presently the U.S. would be over 70% self-sufficient. (more…)

Take a look at the following energy saving ideas and new green products and see how many you can use to save your hard earned cash. Then use the savings to fund a short vacation or a trip to Disneyland.

Replace Bulbs with Compact fluorescent bulbs (CFL)

Green products do help, when you replace just one incandescent bulb with one of the new ENERGY STAR® CFL, (more…)

One of the main benefits from future use of biofuels would be the reduction of greenhouse gases compared to the use of fossil fuels. Carbon dioxide, a greenhouse gas that contributes to global warming, is released into the air from combustion. Twenty-four percent of worldwide energy-related carbon emissions in 1997 were from the United States. Carbon and due to rising energy consumption, are expected to increase 1.3 percent per year through 2015. (more…)

Don’t pay for your energy anymore use solar panels and a residential wid generator and have the electric company paying you. You plug in a device, flip a switch and bam! You’re making smoothies and watching TV in a matter of seconds. Why would anyone want to give that up?

For starters, how would you like to pay $0 in utility bills for the rest of your life? (more…)