Exposure to indoor air pollution from the combustion of solid fuels has been implicated, with varying degrees of evidence, as a causal agent of several diseases in developing countries. In a review of the epidemiological evidence for the health effects of indoor smoke from solid fuels, Bruce et al. concluded that, despite some methodological limitations, epidemiological studies provide compelling evidence of causality for acute respiratory infections (ARI) and chronic obstructive pulmonary disease (COPD). This is reinforced by experimental data, studies of pathogenesis, and indirect evidence from environmental tobacco smoke (ETS) and ambient air pollution studies. (more…)
Important research over the past few decades has illustrated that indoor air pollution and indoor smoke from solid fuel poses i ...
Exposure to air pollutants and air pollution problem are very high in indoor environments in developing countries. Smith has es ...
Smoke from biomass and coal combustion contains a large number of pollutants with known health hazards, including particulate matte ...
Indoor air quality (IAQ) research deals with the presence, levels, health effects, and control of physical, chemical, and biologica ...
In terms of aggregate health effects, household solid fuel use is currently the most important source of indoor air pollution i ...
Reducing exposure to indoor air pollution from household energy use can be achieved through interventions in of the following areas:
* Emissions source and energy technology (fuel– stove combination).
* Housing design and ventilation.
* Behavior and time–activity budget. (more…)
Important research over the past few decades has illustrated that indoor air pollution and indoor smoke from solid fuel poses i ...
Indoor air quality (IAQ) research deals with the presence, levels, health effects, and control of physical, chemical, and biologica ...
Exposure to air pollutants and air pollution problem are very high in indoor environments in developing countries. Smith has es ...
Lack of access to cleaner energy and the negative outwardnesses associated with energy consumption tend to cycle of poverty for ...
Coal is still used to a small extent for home heating and cooking. In the homes of more affluent nations, coal is used for recreati ...
Transportation is another sector that has increased its relative share of primary energy use. This sector has serious concerns as it is a significant source of CO2 emissions and other airborne pollutants, and it is almost totally based on oil as its energy source. An important aspect of future changes in transportation depends on what happens to the available oil resources, production and prices. At present, 95% of all energy for transportation comes from oil. (more…)
Under both former President Bush and new President Obama, the U.S. government has vowed to reduce reliance on imported oil. The ...
Global energy consumption in the last half century has increased very rapidly and is expected to continue to grow over the next ...
From prehistory until the Industrial Revolution, most energy sources used by humans were localized (i.e., available within 5–10 mil ...
Do we have the resources? Rudolf Diesel developed the diesel engine which ran on biodiesel vegetable oil in the late 1800s. At the ...
One study that does address the peak-oil scenario directly is a 2005 report conducted for the National Energy Technology Labora ...
The formation of acidic deposition is largely from the combustion of fossil fuels and the smelting of sulfide ores. Minor natural sources exist such as the formation of hydrochloric and sulfuric acid from gaseous volcanic eruptions.
There are well over 100 gaseous and aqueous phase reactions that can lead to acid formation and more than fifty oxidizing agents and catalysts may be involved. However, in the simplest terms sulfur in fuels is oxidized to SO2 , and SO2 in the atmosphere is further oxidized and hydrolyzed to sulfuric acid. Most nitric acid is formed by the fixation of atmospheric nitrogen gas (N2) to NOx (NO and NO2) during high temperature combustion emissions, followed by further oxidation and hydrolysis that produces nitric acid in the atmosphere. (more…)
Acid deposition and the associated particulate nitrates and sulfates are implicated in the deterioration of certain sensitive e ...
The increased use of fossil energy since the industrial revolution, and especially since 1950, has been the major cause of incr ...
Although underground coal mines operations are not as visible as surface mining, their overall environmental impact can be greater ...
Historically, mining companies have extracted the earth’s resources wherever economics made it feasible, secure in their knowledge ...
There are numerous possible applications for hybrid power systems. The most common examples are (1) remote AC network, (2) distributed generation applications in a conventional utility network, and (3) isolated or special purpose electrical loads.
The classic example of the hybrid energy systems is the remote, diesel-powered AC network. The basic goal is to decrease the amount of fuel consumed by diesel generators and to decrease the number of hours that they operate. The first addition to ‘‘hybridize’’ the system is to add another type of generator, normally using a renewable source. (more…)
The term hybrid energy system refers to those applications in which multiple energy unit conversion devices are used together t ...
The characteristics and components of a hybrid system depend greatly on the application. The most important consideration is wh ...
Renewable energy generators are devices that convert energy from its original form in the renewable energy source into electric ...
The primary electric drivetrain components for fuel cell vehicles are the same as those for any electric vehicle: traction motors, ...
The term hybrid energy system refers to those applications in which multiple energy unit conversion devices are used together to supply an energy requirement. These systems are often used in isolated applications and normally include at least one renewable energy source in the configuration. Hybrid energy systems are used an alternative to more conventional systems, which typically are based on a single fossil fuel source. Hybrid energy systems may also be used as part of distributed generation application in conventional electricity grid. (more…)
There are numerous possible applications for hybrid power systems. The most common examples are (1) remote AC network, (2) dist ...
The characteristics and components of a hybrid system depend greatly on the application. The most important consideration is wh ...
Renewable energy generators are devices that convert energy from its original form in the renewable energy source into electric ...
The primary electric drivetrain components for fuel cell vehicles are the same as those for any electric vehicle: traction motors, ...
Drying is one of the most important post harvest steps. It enhances the storage life of the crop products, minimizes losses during storage, and saves shipping costs. The drying process is the removal of water from the wet surface of the food. In this process, heat is transferred by convection and radiation to the surface of the produce. This heat raises the temperatures heat and evaporates the moisture from the exterior of the agricultural products, diffusing the interior moisture to the surface and replenishing the evaporated surface moisture. (more…)
Solar dryers are special structures that enhance the drying power of the sun and protect the agricultural product from dust, dirt, ...
The moisture content of the feedstock affects the gas composition and the energy balance of the process since gasification is an en ...
Biomass Storage Biomass storage is required to ensure the continuous operation of the facility. To limit the space required for ...
As a result of high and rising costs of fossil fuels and fossil fuels affect global environment concern , and by the reduction ...
Solar distillation is the process in which solar heat is used to purify water from an impure water source by evaporation and conden ...
Most discussions of energy use in paper production and papermaking are confusing because of a failure to define exactly what is meant by energy. It is important to keep track of the form in which energy is used. The major inputs to a paper mill are wood, purchased energy in the form of electricity and fossil fuels, and water. Some components of the wood are used as a raw material and some as by-product fuel. What the industry generally reports is the process energy use at the mill, which is the sum of the purchased energy and the process by-product energy (part of the energy originally in the wood) that is used. (more…)
More than 48% of the raw material fiber used for paper production (chemical pulp or mechanical pulp) in the United States in 2002 w ...
Agricultural and forestry residues provide the largest proportion of biomass used for the production of biomas bioenergy. Some esti ...
To date, most discussion and research relating to the various of biomass role in mitigating CO2 emissions has been focused around i ...
Another large source of renewable carbon supplies is waste biomass. It consists of a wide range of materials and includes munic ...
In Europe, modern renewable energy sources technologies were explored thoroughly for the first time after the oil embargo/ price cr ...
Formaldehyde is an essential chemical substance made use of widely by manufacturers’ of building and construction materials and household/residence products. It’s also a by-product of coal combustion as well as specific other organic and natural processes. Formaldehyde is available in substantially large levels of concentrations either inside or outside. Formaldehyde vapors tend to be odorless unless of course in higher concentrations. (more…)
Using blankets the width of your wall studs, insert the blanket between the studs and staple to the studs. (The job is easier i ...
It is easier and less costly to fit insulation in a new home than to retrofit. However, many existing houses have little or no insu ...
You know where to insulate, but there’s still one more thing you need to know about—vapor barriers. Well-insulated attics, craw ...
You must perform some sort of tour and visit of your home and property to find out exactly where it may need in applying insulation ...
Many home owners want to use brick veneer exterior walls for their houses. The brick is usually the automatic choice for outd ...
In this new century, there is considerable pressure on the top six automakers to reduce their environmental and ecological footprint calculation. The automaker that wins the race to build and sell the superior car will shape consumer preferences, thereby boosting sales and profits. The winning firm will fashion a corporate strategy that drives automobile emissions to near zero while simultaneously providing high levels of performance, safety, and comfort. (more…)
Corporate environmental strategy (CES) involves the tools, management programs, processes, and product development choices that all ...
In the pursuit of superior cars, electronic products, and computing, several leading multinational corporations began in the last q ...
Although it is significant that many of the above four imperatives are qualitative, not quantitative, such new efforts have begun t ...
This latter form of new car taxes can actually serve as an impediment to higher fuel economy to the extent that increased energ ...
There are several options that, ultimately, must be integrated when attempting to realize a change in corporate culture: the legal ...