Electrodynamic Suspension (EDS) can be viewed as an array of magnets moving over a conducting sheet and being pushed upwards by forces due to induced currents. This electrodynamic suspension that was pioneered by Gordon Danby and James Powell in the 1960s, can not work at zero speed, but at higher speeds it can be inherently stable. The virtue of Electrodynamic Suspension designs is their ability to operate with larger air gaps than is feasible with Electromagnetic Suspension EMS designs. (more…)
Electromagnetic Suspension (EMS) system in which an array of magnets is attracted upwards to a steel rail. It is possible to de ...
A propulsion alternative is to transfer power to the vehicle and then have a magnetic structure on the vehicle that can create ...
In contrast to electromagnetic suspension systems, electrodynamic suspension systems can provide stable suspension without a feedba ...
All electromagnetic suspension-based systems employ some type of feedback control mechanism to maintain stable levitation. (An inte ...
High-speed maglev technology offers four main advantages: non-contact operation; low-mass vehicles (on a per seat basis, maglev veh ...
Electromagnetic Suspension (EMS) system in which an array of magnets is attracted upwards to a steel rail. It is possible to design the magnets so that there is an upward force produced by magnetic attraction that cancels the downward gravitational force: the magnets are suspended in space! If steel beams were mounted on either side of a “guideway,” then a vehicle with magnets on both sides could move along the guideway and be supported and guided by the steel rails. (more…)
Electrodynamic Suspension (EDS) can be viewed as an array of magnets moving over a conducting sheet and being pushed upwards by ...
All electromagnetic suspension-based systems employ some type of feedback control mechanism to maintain stable levitation. (An inte ...
In contrast to electromagnetic suspension systems, electrodynamic suspension systems can provide stable suspension without a feedba ...
A propulsion alternative is to transfer power to the vehicle and then have a magnetic structure on the vehicle that can create ...
Wind energy alongside solar energy is one form of renewable energy and its supply is abundant in earth. Most people distinguish ...
A propulsion alternative is to transfer power to the vehicle and then have a magnetic structure on the vehicle that can create a moving field that, in turn, interacts with a conducting guide way to provide propulsion. This is called a short stator linear induction motor (or linear asynchronous motor), generally referred to as a Linear Induction Motor. It is possible to put the powered winding on the guide way and induce currents in a conductor on the vehicle, in which case it would be a long stator design, but this turns out to be an expensive and inefficient approach to maglev propulsion. (more…)
Electrodynamic Suspension (EDS) can be viewed as an array of magnets moving over a conducting sheet and being pushed upwards by ...
All electromagnetic suspension-based systems employ some type of feedback control mechanism to maintain stable levitation. (An inte ...
Electromagnetic Suspension (EMS) system in which an array of magnets is attracted upwards to a steel rail. It is possible to de ...
In contrast to electromagnetic suspension systems, electrodynamic suspension systems can provide stable suspension without a feedba ...
High-speed maglev technology offers four main advantages: non-contact operation; low-mass vehicles (on a per seat basis, maglev veh ...
High-speed maglev technology offers four main advantages: non-contact operation; low-mass vehicles (on a per seat basis, maglev vehicles weigh approximately one-third to three-quarters as much as high speed trains); high speed; and wayside system control and self-propelled vehicles (each car contains its own secondary part of a linear synchronous motors).
Non-contact operation means that vehicle traction does not depend on adhesion between contact surfaces, e.g., wheels and rails. (more…)
A propulsion alternative is to transfer power to the vehicle and then have a magnetic structure on the vehicle that can create ...
Electrodynamic Suspension (EDS) can be viewed as an array of magnets moving over a conducting sheet and being pushed upwards by ...
Designers in China have launched the first wind turbine levitating in the world of permanent magnetic levitation (Maglev) in the Wi ...
All electromagnetic suspension-based systems employ some type of feedback control mechanism to maintain stable levitation. (An inte ...
Electromagnetic Suspension (EMS) system in which an array of magnets is attracted upwards to a steel rail. It is possible to de ...
All electromagnetic suspension-based systems employ some type of feedback control mechanism to maintain stable levitation. (An interesting exception to the above rule, which has been demonstrated in the laboratory, consists of a permanent magnet suspended below a block of high-temperature superconducting material held below its critical temperature. Stable suspension results from a property of the superconducting state that immobilizes magnetic field lines in the superconducting material.) (more…)
In contrast to electromagnetic suspension systems, electrodynamic suspension systems can provide stable suspension without a feedba ...
Electromagnetic Suspension (EMS) system in which an array of magnets is attracted upwards to a steel rail. It is possible to de ...
A propulsion alternative is to transfer power to the vehicle and then have a magnetic structure on the vehicle that can create ...
Electrodynamic Suspension (EDS) can be viewed as an array of magnets moving over a conducting sheet and being pushed upwards by ...
High-speed maglev technology offers four main advantages: non-contact operation; low-mass vehicles (on a per seat basis, maglev veh ...
In contrast to electromagnetic suspension systems, electrodynamic suspension systems can provide stable suspension without a feedback system. Imagine a magnet held above a moving flat sheet of aluminum or copper. Following Ampere’s law of induction, an electric field is induced in the moving metal surface that causes eddy currents to flow in closed loops near its surface. The eddy currents in turn set up their own magnetic field, whose polarity, in accordance with Lenz’s law, opposes that of the magnet’s field. Consequently, the magnet is repelled from the moving metal surface, countering the force of gravity. If the magnet is pushed down toward the moving metal surface, the induced currents and the resultant repulsive force increase, restoring the equilibrium position automatically. Conversely, if the magnet is moved upward, the levitating force decreases. (more…)
All electromagnetic suspension-based systems employ some type of feedback control mechanism to maintain stable levitation. (An inte ...
Electromagnetic Suspension (EMS) system in which an array of magnets is attracted upwards to a steel rail. It is possible to de ...
Electrodynamic Suspension (EDS) can be viewed as an array of magnets moving over a conducting sheet and being pushed upwards by ...
A propulsion alternative is to transfer power to the vehicle and then have a magnetic structure on the vehicle that can create ...
The next time you hear an airplane flying overhead, look up, and pause for a moment. What you see is a machine that is heavier than ...
Designers in China have launched the first wind turbine levitating in the world of permanent magnetic levitation (Maglev) in the Wind Power Asia Exhibition 2006.
Considered a key step in the evolution of global wind power technology and a notable advance in independent intellectual property rights in China. The generator was jointly developed by the Institute of Energy Research of Guangzhou in the Chinese Academy of Sciences and Guangzhou Hengyuan Energy Science & Zhongke Technology Co., Ltd. (more…)
Renewable energy generators are devices that convert energy from its original form in the renewable energy source into electric ...
In 2001, there were 14,000 small wind turbines for home/domestic use in the United States. The market potential for national an ...
Wind is a natural and inexhaustible source of energy, wind does not have to be imported or mined from deep down the earth. Wind ...
The wind power potentially could produce 40 times more electricity than worldwide energy consumption annually, according to res ...
Germany is considered a world leader in wind energy deployment, with electricity production from wind having gone up more than eigh ...
Some forms of alternative energy sources are really new; while most of the energy forms are really come form in development and scientists have been investigated for several hundred years. One of the energy forms is biomass and bioenergy. Bioenergy refers to the burning of organic materials that would otherwise be simply discarded or not being considered at all. (more…)
Some of alternative fuel sources are by no means new. For centuries people have harnessed the power of running water for a vari ...
With ethanol’s future uncertain, many commentators see the transportation debate evolving into a war between two other technologies ...
Most production systems try to become first full-scale production begins as small toys and devices of concept. The Horizon hydr ...
Most alternative fuel vehicles on the road today were originally designed for gasoline, but converted for use with an alternative f ...
The hydrogen can come from various sources including fossil fuels, wind, solar, biomass, nuclear, solar thermo-chemical reactio ...
Nuclear power plants have many different designs and shapes. Early technology restrictions in nuclear power plants make huge plants with the capability to produce the greatest amount of power possible. But with more recent technology, nuclear plants size are smaller , making them less costly and easier to build. But despite their many technical and engineering differences, nuclear reactors come in two basic types: pressurized water reactor systems and boiling water reactor systems. (more…)
Nuclear fission and fusion Research and Development continues to account for nearly half of the total spending by IEA countries, al ...
ITMA Foundation, a group of researchers formed by Javier Belzunce, José Manuel Artimez, Ana Moran and Ruben Coto, has developed the ...
Because a nuclear explosion in a nuclear power plant is impossible due to the low fuel enrichment, the worst conceivable accident i ...
In the United States, Department of Energy has determined that nuclear power accounts for about 21% of the total electricity ge ...
Electricity generation through nuclear power plant is an enormously complex technical feat. It takes the combined skills of geo ...