Transportation is another sector that has increased its relative share of primary energy use. This sector has serious concerns as it is a significant source of CO2 emissions and other airborne pollutants, and it is almost totally based on oil as its energy source. An important aspect of future changes in transportation depends on what happens to the available oil resources, production and prices. At present, 95% of all energy for transportation comes from oil. (more…)

Because transportation is such a large contributor to global warming, both globally and in the United States, climate and energy experts say finding clean alternatives to gasoline is also key to replacing fossil fuels and slowing global warming. Just as there is debate and competing research about which type of alternative transportation fuel should be developed to produce electricity, however, there is also competition among possible new transportation fuels. So far, in the United States, significant funding has been put into two transportation technologies—ethanol and hydrogen fuel cells. Many energy commentators say cars powered by electric batteries are the technology closest to mass production capability, however. (more…)

With ethanol’s future uncertain, many commentators see the transportation debate evolving into a war between two other technologies—hydrogen-powered fuel cells and battery powered electric vehicles. Some alternative fuel advocates are putting their support behind hydrogen, the most abundant element on Earth. Water, for example, is composed of hydrogen and oxygen molecules. Hydrogen can be produced from water by electrolysis, which separates the oxygen from the hydrogen. It can be used to power hydrogen fuel cells for vehicles (or to provide heat and electricity for buildings). Hydrogen fuel cells work by recombining hydrogen and oxygen—a process that produces electricity, heat, and water. Hydrogen-powered cars, therefore, could be an ideal transportation solution—nonpolluting, zero-emission vehicles that release only water, a natural and completely safe waste product. Also, fuel cells are highly efficient and powerful, and unlike typical batteries, fuel cells will never lose their charge as long as hydrogen fuel is supplied.

Hydrogen fuel cell technologies, however, must overcome many stubborn challenges before they can become a practical source of energy. Perhaps the biggest obstacle is cost; it currently takes more energy to make hydrogen than is produced, and production relies on expensive catalysts made from platinum, a scarce metal. And like biofuels, hydrogen is currently made using fossil fuels, so it is not emissions-free. In addition, liquid hydrogen fuel is highly flammable and must be stored at very low temperatures or under very high pressure, making transport and storage difficult. Switching vehicles to hydrogen fuel cell power also would require building a whole new infrastructure similar to the chain of gas stations that currently dot the landscape. Researchers are hoping to find answers to these problems by searching for other types of catalysts, studying other ways to improve production, and developing better hydrogen storage options.

Hydrogen researchers, however, have been promising breakthroughs since the 1990s with little progress to show for their efforts. Many observers are thus coming to the conclusion that the hydrogen fuel cell is a technology that will not be perfected in the near future. As physicist and climate expert Joe Romm explains, “Neither government policy nor business investment should be based on the assumption that these technologies will have a significant impact in the near or medium-term.” The Obama administration apparently agrees; it submitted a budget for 2010 that sharply cut back on government support for hydrogen projects. U.S. Energy Secretary Steven Chu explained the administration’s problems with hydrogen technology:

Right now, the way we get hydrogen primarily is from reforming [natural] gas. That’s not an ideal source of hydrogen. . . . The other problem is, if it’s for transportation, we don’t have a good storage mechanism yet. Compressed hydrogen is the best mechanism [but it requires] a large volume. We haven’t figured out how to store it with high density. What else? The fuel cells aren’t there yet, and the distribution infrastructure isn’t there yet. So . . . to get significant deployment, you need four significant technological breakthroughs. That makes it unlikely

Congress promptly reversed President Obama’s decision, however, restoring more than $200 million to 190 hydrogen projects around the country.

The energy efficiencies of various fuel production pathways from well to pump. The efficiencies shown are defined as the energy in a given fuel (available at pumps in vehicle refueling stations) divided by total energy inputs during all Well-to-Pump activities, including the energy content of the fuel. One way to interpret the Well-to-Pump efficiencies in the figure is as the difference between 100% and the energy efficiencies, which roughly represent energy losses during Well-to-Pump stages for making a given fuel available at the pump. As stated in Section 3, Well-to-Pump activities include biomass feedstock production; feedstock transportation and storage; fuel production; and fuel transportation, storage, and distribution. (more…)

At present, in the United States and worldwide, motor vehicles are fueled almost exclusively by petroleum based gasoline (or reformulated gasoline) and diesel fuels. Since the first oil price shock in 1973, efforts have been made to seek alternative fuels to displace gasoline and diesel fuels and achieve energy and environmental benefits. Some of the alternative fuels that have been researched and used are liquefied petroleum gas (LPG), compressed natural gas (CNG), liquefied natural gas (LNG), methanol (MeOH), dimethyl ether (DME), Fischer– Tropsch diesel (FTD), hydrogen (H 2 ), ethanol (EtOH), biodiesel, and electricity. Production processes associated with gasoline, diesel, and each of these alternative fuels differ. (more…)

The spark-ignition and compression-ignition engine and internal combustion engines technologies that are currently employed in motor vehicles were developed more than 100 years ago. These conventional vehicle technologies are fueled by petroleum-derived gasoline and diesel fuels (the socalled conventional fuels). Over the past 100 years, the conventional technologies have been dramatically improved, reducing cost and increasing performance. (more…)

Fuel cells are typically classified according to type of electrolyte. While many varieties of fuel cells have been demonstrated in the laboratory, five major types are seeing development for commercial applications:

* Polymer electrolyte membrane (PEM) cells use a plastic (polymer) membrane that becomes electrically conducting when hydrated (saturated with water); they operate near 1001C.
* Alkaline fuel cells use a caustic electrolyte such as potassium hydroxide (KOH); they also operate near 1001C. (more…)

There are different types of vehicle propulsion systems and the transportation fuels that have been studied for their potential to power the vehicles. Gasoline, CNG, LNG, LPG, methanol, ethanol, and hydrogen can be used in vehicles equipped with conventional spark-ignition (SI) engines. Interest in developing efficient, low-emission, spark-ignition direct-injection (SIDI) engine technologies has heightened in recent years. (more…)

Polymer Electrolyte Fuel Cells have high-power density, rapid startup, and low-temperature operation (around 80 to 120 C), and so are ideal for use in applications such as energy transport and battery replacement. The electrolyte used is a proton conducting polymer. This is typically a perfluorinated polymer, though other hydrocarbon-based membranes are under development in an attempt to reduce cost or to enable operation at temperatures approaching 200 C. The catalytically active layer sits adjacent to the membrane, supported on a PTFE treated carbon paper, which acts as current collector and gas diffusion layer. For operation on pure hydrogen, platinum is the most active catalyst, but alloys of platinum and ruthenium are used when higher levels of carbon monoxide are present (CO is a poison in all low temperature fuel cells). (more…)

The commercialization prospects for fuel cell vehicles depend not only on their performance and cost, but also on how well they can compete with other technology options that address similar market and policy needs. While market forces have not traditionally motivated design change for reasons of environmental performance, customer values and expectations can evolve and such characteristics could grow in importance. However, inherent market conservatism will favor less disruptive ways to address evolving needs, which might be met by improved gasoline and diesel vehicles, including hybrid-electric versions. Yet looking over the long run, particularly the need to substantially reducing greenhouse gas emissions, hydrogen fuel cells may well provide a solution that is superior to other alternatives. (more…)