With ethanol’s future uncertain, many commentators see the transportation debate evolving into a war between two other technologies—hydrogen-powered fuel cells and battery powered electric vehicles. Some alternative fuel advocates are putting their support behind hydrogen, the most abundant element on Earth. Water, for example, is composed of hydrogen and oxygen molecules. Hydrogen can be produced from water by electrolysis, which separates the oxygen from the hydrogen. It can be used to power hydrogen fuel cells for vehicles (or to provide heat and electricity for buildings). Hydrogen fuel cells work by recombining hydrogen and oxygen—a process that produces electricity, heat, and water. Hydrogen-powered cars, therefore, could be an ideal transportation solution—nonpolluting, zero-emission vehicles that release only water, a natural and completely safe waste product. Also, fuel cells are highly efficient and powerful, and unlike typical batteries, fuel cells will never lose their charge as long as hydrogen fuel is supplied.
Hydrogen fuel cell technologies, however, must overcome many stubborn challenges before they can become a practical source of energy. Perhaps the biggest obstacle is cost; it currently takes more energy to make hydrogen than is produced, and production relies on expensive catalysts made from platinum, a scarce metal. And like biofuels, hydrogen is currently made using fossil fuels, so it is not emissions-free. In addition, liquid hydrogen fuel is highly flammable and must be stored at very low temperatures or under very high pressure, making transport and storage difficult. Switching vehicles to hydrogen fuel cell power also would require building a whole new infrastructure similar to the chain of gas stations that currently dot the landscape. Researchers are hoping to find answers to these problems by searching for other types of catalysts, studying other ways to improve production, and developing better hydrogen storage options.
Hydrogen researchers, however, have been promising breakthroughs since the 1990s with little progress to show for their efforts. Many observers are thus coming to the conclusion that the hydrogen fuel cell is a technology that will not be perfected in the near future. As physicist and climate expert Joe Romm explains, “Neither government policy nor business investment should be based on the assumption that these technologies will have a significant impact in the near or medium-term.” The Obama administration apparently agrees; it submitted a budget for 2010 that sharply cut back on government support for hydrogen projects. U.S. Energy Secretary Steven Chu explained the administration’s problems with hydrogen technology:
Right now, the way we get hydrogen primarily is from reforming [natural] gas. That’s not an ideal source of hydrogen. . . . The other problem is, if it’s for transportation, we don’t have a good storage mechanism yet. Compressed hydrogen is the best mechanism [but it requires] a large volume. We haven’t figured out how to store it with high density. What else? The fuel cells aren’t there yet, and the distribution infrastructure isn’t there yet. So . . . to get significant deployment, you need four significant technological breakthroughs. That makes it unlikely
Congress promptly reversed President Obama’s decision, however, restoring more than $200 million to 190 hydrogen projects around the country.
The total installed geothermal power generating capacity in the world is approximately 9000 MWe from 21 countries, with the United States leading at nearly 3000 MWe and The Philippines with nearly 2000 MWe (Table II). Other major countries are Italy, Mexico, Indonesia, Japan, and New Zealand, with between 400 and 800 MWe each. (more…)
Microtechnology-Based Energy and Chemical Systems will most likely employ combustion for driving processes such as vapor generation and vapor barrier, endothermic chemical reactions, and (most notably) fuel reforming. Both fuel reformers and combustors will be of a miniature design relying on embedded catalysts for promoting chemical reactions at moderate temperatures (350–7501C). Many potential configurations exist depending on the application and constraints on the design. Microchannel arrays are a potential configuration; mesh and post architecture is another to achieve the desired surface area and small diffusional lengths necessary. (more…)
The energy efficiencies of various fuel production pathways from well to pump. The efficiencies shown are defined as the energy in a given fuel (available at pumps in vehicle refueling stations) divided by total energy inputs during all Well-to-Pump activities, including the energy content of the fuel. One way to interpret the Well-to-Pump efficiencies in the figure is as the difference between 100% and the energy efficiencies, which roughly represent energy losses during Well-to-Pump stages for making a given fuel available at the pump. As stated in Section 3, Well-to-Pump activities include biomass feedstock production; feedstock transportation and storage; fuel production; and fuel transportation, storage, and distribution. (more…)
At present, in the United States and worldwide, motor vehicles are fueled almost exclusively by petroleum based gasoline (or reformulated gasoline) and diesel fuels. Since the first oil price shock in 1973, efforts have been made to seek alternative fuels to displace gasoline and diesel fuels and achieve energy and environmental benefits. Some of the alternative fuels that have been researched and used are liquefied petroleum gas (LPG), compressed natural gas (CNG), liquefied natural gas (LNG), methanol (MeOH), dimethyl ether (DME), Fischer– Tropsch diesel (FTD), hydrogen (H 2 ), ethanol (EtOH), biodiesel, and electricity. Production processes associated with gasoline, diesel, and each of these alternative fuels differ. (more…)
There are different types of vehicle propulsion systems and the transportation fuels that have been studied for their potential to power the vehicles. Gasoline, CNG, LNG, LPG, methanol, ethanol, and hydrogen can be used in vehicles equipped with conventional spark-ignition (SI) engines. Interest in developing efficient, low-emission, spark-ignition direct-injection (SIDI) engine technologies has heightened in recent years. (more…)
The energy that people use every day comes from many different sources. The resources are divided into two main groups: renewable energy and nonrenewable energy. Renewable energy sources are those that can be used again and again. Renewable energy resources have unlimited supply. (more…)
It is a rare company prospectus that begins with a quotation from Goethe: “Whatever you can do, or dream you can, begin it. Boldness has genius, power, and magic in it.” But Lovins is not a normal entrepreneur, as anyone who has met this eccentric and disheveled but unmistakably visionary thinker knows. The founder of the Rocky Mountain Institute, a leading green think tank based in Old Snowmass, Colorado, thinks the car industry’s incremental approach to cutting emissions and improving fuel efficiency will never amount to much. He wants a complete redesign of the automobile, from the bottom up, and intends to show the big boys how it should be done. (more…)
A fuel cell is an electrochemical device that directly converts a fuel to electricity by means of reactions on the surfaces of electrodes and transport of ions through an electrolyte. A fuel cell can be thought of as a chemical battery whose reactants are fed from external sources rather than packaged as part of the battery. A key feature of a fuel cell is transformation of the chemical potential energy of a fuel directly into electricity, a high-value form of energy that can be put to many uses from electricity conversion. The fuel cell’s direct energy unit conversion process occurs without an intermediate step of heat generation, as involved in combustion engines. (more…)
Agricultural and forestry residues provide the largest proportion of biomass used for the production of biomas bioenergy. Some estimates suggest that globally available biomass role in the form of recoverable residues represents about 40 Ejyr -1, enough to meet 10% of the total present energy use of 406 Ejyr -1 . However, realizing this potential is limited by factors such as ease and cost of recovery and environmental concerns relating to sustainable land use practices. (more…)
