Geothermal wells need to undergo a test program before they are used. This is so that the baseline conditions of both the wells and the geothermal aquifers that they tap can be determined. This baseline data are critical because all future information is compared against them.

After drilling has been completed and before the initial discharge, the well downhole conditions are measured. The temperature and pressure are measured by using a clockwork Kuster gauge or electronic logging tools. Standard practice is to initially do an injection (or completion) test, that is, sometime at a series of flows, where the temperature, pressure, and possibly flows using a spinner tool are measured at intervals down the open hole section of the well. (more…)

Thermo chemical processing of biomass yields gaseous, liquid, and solid products and offers a means of producing useful gaseous and/or liquid fuels. Biomass gasification is a total degradation process consisting of a sequence of thermal and thermo chemical processes that converts practically all the carbon in the biomass to gaseous form, leaving an inert residue. The gas produced consists of carbon monoxide (CO), hydrogen (H2), carbon dioxide (CO2), methane (CH4), and nitrogen (N2) (if air is used as the oxidizing agent) and contains impurities, such as small char particles, ash, tars, and oils. The solid residue will consist of ash (composed principally of the oxides of Ca, K, Na, Mg, and Si) and possibly carbon or char. (more…)

The increased use of fossil energy since the industrial revolution, and especially since 1950, has been the major cause of increased emissions of air pollutants and, correspondingly, many environmental problems. Emissions due to the use of energy are major sources of sulfur dioxide, nitrogen oxides, carbon dioxide, and soot and constitute a large contribution of methane, non-methane volatile organic compounds, and heavy metals. (more…)