Biomass Storage
Biomass storage is required to ensure the continuous operation of the facility. To limit the space required for storage at the plant site, biomass must be stored in relatively high piles. Two main problems associated with fuel storage are decomposition and selfheating. Self-heating increases the rate of decomposition and fire risk, and it encourages the growth of thermophilic fungi whose spores can cause a respiratory condition in humans similar to farmers lung. Some small virgin biomass losses may occur at the storage stage, but they are likely to be negligible. For intermediary storage of the fuel between the pretreatment (e.g., drying and sizing) and gasification stage, storage silos may be used. (more…)
The moisture content of the feedstock affects the gas composition and the energy balance of the process since gasification is an endothermic process. Water vapor, however, is an essential component of gasification reactions. Therefore, there is a trade-off between the extent of fuel drying and the quality of product gas. Drying of the feedstock to a moisture content of approximately 15% is commonly adopted. Fuel drying is likely to be the most energy intensive activity in the biomass gasification process. Important contributions can be made to the energy balance by using flue gases or steam to dry the biomass. The heat used for drying does not have to be high temperature, and a low temperature level is actually desired because it will prevent the evaporation of undesirable organic components. (more…)
Several passive heating systems, if provided with proper ventilation, can ensure to provide cooling. Passive heating and cooling for houses can be done in several ways, one of which is called geothermal energy. Passing the water through pipelines via ground can achieve and distribute the heating and cooling all over the house. (more…)
If water is put on the floor on a cleaning operation, it tends to dry rapidly after a short time. In this position, we say that the water evaporates. Basically what happened is this means that changes in water levels from liquid to gas or steam. Evaporation occurs when molecules escape the surface of a liquid when they have enough kinetic energy to go off from the body of liquid. (more…)
