Power generation and distribution networks are built with spare capacity to meet peak periods of energy consumption is usually a time when demand for heating and / or cooling is particularly acute accommodate. Normally, peak electricity demand in some cases last just a few hours every year. And while the networks have always had to cope with peaks in recent years, the electricity consumption during peak hours has increased dramatically in the afternoon. (more…)
Here, the sensitivity of energy demand to climate is measured two ways. The first method uses elasticities that provide simple summ ...
HVAC (heating, ventilation, and air-conditioning) systems vary depending on the complexity of room units size from single rooms ...
To determine the effects of past climate trends on global energy consumption, the econometric equations providing the degree day el ...
After lighting, personal computers (PC) and monitors have the highest energy use in office environments. Studies have shown tha ...
The office copy machines (photocopier) is everywhere. Seven millions unit are in used in the United States and more than 1.5 mi ...
Exposure to air pollutants and air pollution problem are very high in indoor environments in developing countries. Smith has estimated that at the aggregate level (i.e., without accounting for particle size, chemical composition, and source), approximately 80% of total global exposure to airborne particulate matter occurs indoors in developing nations. Details of exposure for various household members, and the roles of both pollution and behavior (e.g., location with respect to stove and activities), have been studied and evaluated using new tools and technology. (more…)
Important research over the past few decades has illustrated that indoor air pollution and indoor smoke from solid fuel poses i ...
Exposure to indoor air pollution from the combustion of solid fuels has been implicated, with varying degrees of evidence, as a ...
Smoke from biomass and coal combustion contains a large number of pollutants with known health hazards, including particulate matte ...
Indoor air quality (IAQ) research deals with the presence, levels, health effects, and control of physical, chemical, and biologica ...
Reducing exposure to indoor air pollution from household energy use can be achieved through interventions in of the following a ...
There are many efforts to make building more comfortable and to reduce the carbon dioxide emissions from buildings. For many years we tried to increase wall thickness of the wall insulation and roof insulation and adding the bottom insulation.
This seems logical, but I recently attended a seminar in where a speaker tried to make a comparison of as opposed to two major areas of new construction. These building were build year apart and built insulation levels in the store later far exceeded the first branch. Although the shops were of similar size, has a similar level of glass and skylights, the shop recently built, although it improved R-values (please refer to insulation R-Value chart), 43% costs warmer than the last. (more…)
It is easier and less costly to fit insulation in a new home than to retrofit. However, many existing houses have little or no insu ...
Imprinted on every batt or blanket of insulation or on every bag of loose insulation is its R-Value. The higher Insulation R-Value, ...
You must perform some sort of tour and visit of your home and property to find out exactly where it may need in applying insulation ...
If your house has no attic (most flat-roof houses don’t), chances are there’s a cockloft, a space between roof and ceiling, at ...
You know where to insulate, but there’s still one more thing you need to know about—vapor barriers. Well-insulated attics, craw ...
The solar technology is not only in the flat solar collector or photovoltaic panel. I follow the process ID and proof of this is the prototype plant to produce solar electricity. (more…)
In today's day and age there are millions of people who generate their own green energy at home by learning how to build windmills ...
Many people are concerned about their rising energy bills and want to do something about reducing the cost of energy at home. There ...
So you're finally tired of those exorbitant electricity bills, or, you're catching onto a "greener" way of life. Either way, solar ...
Solar distillation is the process in which solar heat is used to purify water from an impure water source by evaporation and conden ...
So-called thin-film photovoltaic devices are usually based on mixtures of elements other than silicon — most notably copper ind ...
Today, photovoltaic cells only contribute a small proportion (approximately 0.04 percent) of total electricity in the United States. At the same time the production of solar panels has growth rapidly per year by around 20% growth in the 1990s and photovoltaic panels prices decreases every year. Annual worldwide solar panel production (including solar panels with homemade solar power homes) is about 400 MW per year. Based on the total cumulative capacity figure, it is already reaching 2 GW. (more…)
So-called thin-film photovoltaic devices are usually based on mixtures of elements other than silicon — most notably copper ind ...
The broad range of home solar energy systems are mostly known as Photovoltaic Systems (PV) or Thin Film Solar Technology. The s ...
So you're finally tired of those exorbitant electricity bills, or, you're catching onto a "greener" way of life. Either way, solar ...
In the mid-1880s, Charles Fritts built the first solar cell formed by selenium coated with a thin layer of gold and with an ene ...
The basic processes that occur in such a system are well understood. The semiconductor electrode efficiently absorbs light, produci ...
Parse error: syntax error, unexpected T_STRING, expecting ‘,’ or ‘;’ in /home/jefren/public_html/newenergyalternative.com/wp-content/plugins/exec-php/includes/runtime.php(42) : eval()’d code on line 6
A fuel cell is an electrochemical device that combines hydrogen with oxygen to generate electricity, heat and water to produce. ...
Mercedes-Benz presented at Geneva Style F800 Concept (the F stands for Mercedes: technology, design and art), a prototype that ...
The primary electric drivetrain components for fuel cell vehicles are the same as those for any electric vehicle: traction motors, ...
Transport applications tend to demand rapid start-up and instant dynamic response from fuel cell systems, so a high-temperature ...
Alkaline fuel cell, often known as the Bacon fuel cell following the British inventor’ name. It has become the most created fue ...