Transportation is another sector that has increased its relative share of primary energy use. This sector has serious concerns as it is a significant source of CO2 emissions and other airborne pollutants, and it is almost totally based on oil as its energy source. An important aspect of future changes in transportation depends on what happens to the available oil resources, production and prices. At present, 95% of all energy for transportation comes from oil. (more…)
Under both former President Bush and new President Obama, the U.S. government has vowed to reduce reliance on imported oil. The ...
Global energy consumption in the last half century has increased very rapidly and is expected to continue to grow over the next ...
From prehistory until the Industrial Revolution, most energy sources used by humans were localized (i.e., available within 5–10 mil ...
Do we have the resources? Rudolf Diesel developed the diesel engine which ran on biodiesel vegetable oil in the late 1800s. At the ...
One study that does address the peak-oil scenario directly is a 2005 report conducted for the National Energy Technology Labora ...
Global energy consumption in the last half century has increased very rapidly and is expected to continue to grow over the next 50 years. However, we expect to see significant differences between the last 50 years and the next. The past increase was stimulated by relatively “cheap” fossil fuels and increased rates of industrialization in North America, Europe, and Japan; yet while energy consumption in these countries continues to increase, additional factors are making the picture for the next 50 years more complex. These additional complicating factors include the very rapid increase fuel economy in energy use in China and India (countries representing about a third of the world’s population); the expected depletion of oil resources in the not-too-distant future; and the effect of human activities on global climate change. (more…)
The relationship of gross national product per capita to energy consumption per capita for most countries of the world correlat ...
The long-term prospects for the U.K. economy are inevitably uncertain, and the most recent Department of Energy long-term proje ...
Transportation is another sector that has increased its relative share of primary energy use. This sector has serious concerns ...
The development of the ‘‘new’’ wind and solar technologies is of great importance for the future contribution of RESs to energy sup ...
To determine the effects of past climate trends on global energy consumption, the econometric equations providing the degree day el ...
Most discussions of energy use in paper production and papermaking are confusing because of a failure to define exactly what is meant by energy. It is important to keep track of the form in which energy is used. The major inputs to a paper mill are wood, purchased energy in the form of electricity and fossil fuels, and water. Some components of the wood are used as a raw material and some as by-product fuel. What the industry generally reports is the process energy use at the mill, which is the sum of the purchased energy and the process by-product energy (part of the energy originally in the wood) that is used. (more…)
More than 48% of the raw material fiber used for paper production (chemical pulp or mechanical pulp) in the United States in 2002 w ...
Agricultural and forestry residues provide the largest proportion of biomass used for the production of biomas bioenergy. Some esti ...
To date, most discussion and research relating to the various of biomass role in mitigating CO2 emissions has been focused around i ...
Another large source of renewable carbon supplies is waste biomass. It consists of a wide range of materials and includes munic ...
In Europe, modern renewable energy sources technologies were explored thoroughly for the first time after the oil embargo/ price cr ...
In Europe, modern renewable energy sources technologies were explored thoroughly for the first time after the oil embargo/ price crisis of 1973. Notably, market introduction of renewable energy technology started in about 1985, but the renewable energy sources industry has become vital only during the past decade. Accordingly, relevant statistical renewable energy sources data have been systematically compiled only over the past decade, although reliable and consistent statistical renewable energy sources data, collected since 1989, exist for all 15 countries of the European Union and for Western Europe (defined here as the EU-15 plus Switzerland, Norway, and Iceland). (more…)
There are various and somewhat complementary reasons to foster the growth of renewable energy sources in Europe. A major incent ...
The development of the ‘‘new’’ wind and solar technologies is of great importance for the future contribution of RESs to energy sup ...
Although technology change (usually involving an improvement in energy efficiency) is not inherently a geographic process, it does ...
The energy that people use every day comes from many different sources. The resources are divided into two main groups: renewa ...
Renewable energy sources cannot run out and causes so little damage to the environment that its use does not need to be restric ...
In most countries, geothermal resources are classified as natural resources belonging to the government. Since the 1980s, there has been a worldwide trend to corporatize and/or privatize government commercial activities. Whereas the geothermal resources in the United States have been commercially developed by the private sector since the 1960s at The Geysers, other countries, notably The Philippines, Indonesia, and New Zealand, did not started private commercial geothermal projects until the 1980s. These private power developers are known as independent power producers (IPPs). There is a perception that the private sector is more efficient than the public sector. The efficiency arises from the increased flexibility of the private sector and its accessibility to commercial funding. (more…)
"Spain has great potential but lack geothermal legislation and investment." Besides being clean, renewable and friendly, easily man ...
The Geologists Association president advocates the use of geothermal energy by its high durability and low maintenance. Besides a r ...
Geothermal drilling technology is adapted from the oil industry. Most of the geothermal wells are drilled with a rotary-type drilli ...
The total installed geothermal power generating capacity in the world is approximately 9000 MWe from 21 countries, with the United ...
According to the German standard VDI 4640 geothermal energy is stored energy as heat beneath the Earth's solid surface, encompa ...
Fuel cells are typically classified according to type of electrolyte. While many varieties of fuel cells have been demonstrated in the laboratory, five major types are seeing development for commercial applications:
* Polymer electrolyte membrane (PEM) cells use a plastic (polymer) membrane that becomes electrically conducting when hydrated (saturated with water); they operate near 1001C.
* Alkaline fuel cells use a caustic electrolyte such as potassium hydroxide (KOH); they also operate near 1001C. (more…)
Transport applications tend to demand rapid start-up and instant dynamic response from fuel cell systems, so a high-temperature ...
Polymer Electrolyte Fuel Cells have high-power density, rapid startup, and low-temperature operation (around 80 to 120 C), and ...
Alkaline fuel cell, often known as the Bacon fuel cell following the British inventor’ name. It has become the most created fue ...
The fuel cell can trace its roots back to the 1800s when a Welsh-born, Oxford-educated barrister, Sir William Robert Grove, realize ...
A fuel cell is an electrochemical device that combines hydrogen with oxygen to generate electricity, heat and water to produce. ...
Energy exists in many forms. Some of energy forms are simple to use and identify as energy. But other forms of energy can not be seen until the energy released. Some forms of energy like light and sound, they carry energy from one place to another. There are also vibrating objects that carry the kinetic energy that makes the sound. The energy passes through the wave where the wave was originated. The higher the wave, it gives more energy. Light is also one form of energy. A light beam or light ray brings out energy from where there was light. This energy is often referred to as radiation energy. (more…)
Electricity generation through nuclear power plant is an enormously complex technical feat. It takes the combined skills of geo ...
Like solar radiation, the ocean is another widely available and distributed energy source. The energy in the ocean is in part k ...
Heat has a enormous influence in our daily lives. Heat quantity exposed in our live has related to the foods we eat, the temper ...
Several molecular systems have been constructed that mimic various aspects of photosynthesis. Two of these utilize molecular system ...
The energy that people use every day comes from many different sources. The resources are divided into two main groups: renewa ...
Tanker transportation and oil transport functions as an important link to facilitate the flow of oil and products from their limited sources of origin derived to its destination all over the world. This particular section of ocean shipping industry is the main component of the movement of seaborne cargo. Even though oil is transported through pipelines and tankers and tank wagons, these movements are relatively small and often restricted to national or in a few cases trough the intra-regional trades. The increment in oil demand came not only from the United States & Western Europe, however there is a rapid oil demand recovery in Japan, a country with no domestic oil reserves. (more…)
Oil tankers can be classified into two broad categories: crude oil tankers and product tankers. Crude oil tankers are typically ...
The operations on-board an oil tanker transportation are radically different from those on other types of ships, primarily due ...
Most major oil and gas firms engage in both upstream (i.e., hydrocarbon exploration and production) and downstream (i.e., hydro ...
Gasoline is used mainly by cars, motorcycles, and light trucks; diesel is used mainly by heavier trucks, buses, and trains. Togethe ...
For years it was out of desperation that observers have advised and viewed of American energy policy and geopolitical risks regardi ...
The energy that people use every day comes from many different sources. The resources are divided into two main groups: renewable energy and nonrenewable energy. Renewable energy sources are those that can be used again and again. Renewable energy resources have unlimited supply. (more…)
In Europe, modern renewable energy sources technologies were explored thoroughly for the first time after the oil embargo/ price cr ...
During the US Presidential Election 2008 Campaign, the renewable portfolio standard was one of the main agendas for Presidentia ...
The broad range of home solar energy systems are mostly known as Photovoltaic Systems (PV) or Thin Film Solar Technology. The s ...
The hydrogen can come from various sources including fossil fuels, wind, solar, biomass, nuclear, solar thermo-chemical reactio ...
Renewable energy sources cannot run out and causes so little damage to the environment that its use does not need to be restric ...
The fuel cycle for a given transportation fuel includes the following processes: energy feedstock (or primary energy) production; biomass feedstock transportation and storage; fuel production; fuel transportation, storage, and distribution; and vehicle operations that involve fuel combustion air or other chemical energy conversions. The processes that precede vehicle operations are often referred to as the well-to-pump (WTP) stage, the vehicle operations are referred to as the pump-to-wheels (PTW) stage, and the entire fuel cycle is referred to as the well-to-wheels (WTW) cycle. Various models have been developed that allow researchers to conduct fuel cycle analyses of vehicle/fuel systems. The GREET (greenhouse gases, regulated emissions, and energy transportation) model, developed by Argonne National Laboratory, is in the public domain and, so far, more than 1000 users worldwide have used the model to predict the energy use and emissions associated with alternative fuels vehicles. The GREET model and its documents are posted on the Internet at http:// greet.anl.gov. (more…)
The spark-ignition and compression-ignition engine and internal combustion engines technologies that are currently employed in ...
Because different studies have different system boundaries and parametric assumptions, the studies described in Section 7 resulted ...
ISO document 14040 identifies four areas for using life cycle analysis (LCA) results: (1) identifying opportunities to improve ...
It shows Well-to-Wheels Greenhouse Gas emissions of the 23 vehicle/fuel systems. For each system, the bottom bar represents CO2 ...
The combination of well-to-pump results and the energy use and emissions associated with vehicle operation (also called the pum ...