Air-blown circulating fluidized bed gasifiers are of interest because they produce a good quality, low calorific value (LCV) gas (4–6 MJ/Nm 3 ) and possess a very high carbon conversion efficiency while allowing high capacity, good tolerance to variations in fuel quality, and reliable operation. The high and homogeneously distributed temperatures and the use of particular bed materials, such as dolomite, favor tar cracking. Successful tar cracking can also be achieved using secondary circulating fluidized bed reactors. Also, successful tests on catalytic tar cracking have been performed, for example, by introducing nickel compounds into the gasifier. Sulfur control is made easier because of the significant reduction that can be achieved by adding limestone or dolomite to the gasifier bed. (more…)
The moisture content of the feedstock affects the gas composition and the energy balance of the process since gasification is an en ...
Thermo chemical processing of biomass yields gaseous, liquid, and solid products and offers a means of producing useful gaseous ...
A combination of legislation and technology has helped clean up many of the world’s coal-burning plants. Both developed and develop ...
Biomass Storage Biomass storage is required to ensure the continuous operation of the facility. To limit the space required for ...
Gasification is a thermo chemical process that has been exploited for more than a century for converting solid feedstocks to ga ...
Biomass Storage
Biomass storage is required to ensure the continuous operation of the facility. To limit the space required for storage at the plant site, biomass must be stored in relatively high piles. Two main problems associated with fuel storage are decomposition and selfheating. Self-heating increases the rate of decomposition and fire risk, and it encourages the growth of thermophilic fungi whose spores can cause a respiratory condition in humans similar to farmers lung. Some small virgin biomass losses may occur at the storage stage, but they are likely to be negligible. For intermediary storage of the fuel between the pretreatment (e.g., drying and sizing) and gasification stage, storage silos may be used. (more…)
The moisture content of the feedstock affects the gas composition and the energy balance of the process since gasification is an en ...
Thermo chemical processing of biomass yields gaseous, liquid, and solid products and offers a means of producing useful gaseous ...
A combination of legislation and technology has helped clean up many of the world’s coal-burning plants. Both developed and develop ...
Gasification is a thermo chemical process that has been exploited for more than a century for converting solid feedstocks to ga ...
The product gas can be burned in boilers to generate heat and raise steam, in internal combustion engines to generate electricity a ...
Gasification is a thermo chemical process that has been exploited for more than a century for converting solid feedstocks to gaseous energy carriers. The first gasifier patent was issued in England at the end of the 18th century and producer gas from coal gasification was mainly used as lighting fuel throughout the 19th century. At the turn of the 20th century, the main use of producer gas, obtained essentially from coal, switched to electricity generation and automotive applications via internal combustion engines. The use of producer gas was gradually supplanted by the use of higher energy density liquid fuels and as a result confined to areas with expensive or unreliable supplies of petroleum fuels. (more…)
The product gas can be burned in boilers to generate heat and raise steam, in internal combustion engines to generate electricity a ...
Thermo chemical processing of biomass yields gaseous, liquid, and solid products and offers a means of producing useful gaseous ...
Biomass Storage Biomass storage is required to ensure the continuous operation of the facility. To limit the space required for ...
Estimation of the future technical potential of biomass as an energy source is dependent on assumptions with respect to land av ...
The moisture content of the feedstock affects the gas composition and the energy balance of the process since gasification is an en ...
The development of the ‘‘new’’ wind and solar technologies is of great importance for the future contribution of RESs to energy supply. Although the present wind and solar technology contribution of 0.4% to total primary energy consumption per capita is still very small, the growth of these industries has been considerable in the past 6 to 8 years. Today they provide 10 times the energy of 10 years ago. Wind energy shows the most remarkable growth dynamics; its contribution is now reaching energetically relevant dimensions. (more…)
Although technology change (usually involving an improvement in energy efficiency) is not inherently a geographic process, it does ...
In Europe, modern renewable energy sources technologies were explored thoroughly for the first time after the oil embargo/ price cr ...
In 2001, there were 14,000 small wind turbines for home/domestic use in the United States. The market potential for national an ...
In 2006, total world wind generating electricity capacity was around 72,000 MW, producing some 160 terawatt-hours (TWh) per yea ...
Global energy consumption in the last half century has increased very rapidly and is expected to continue to grow over the next ...
Thermo chemical processing of biomass yields gaseous, liquid, and solid products and offers a means of producing useful gaseous and/or liquid fuels. Biomass gasification is a total degradation process consisting of a sequence of thermal and thermo chemical processes that converts practically all the carbon in the biomass to gaseous form, leaving an inert residue. The gas produced consists of carbon monoxide (CO), hydrogen (H2), carbon dioxide (CO2), methane (CH4), and nitrogen (N2) (if air is used as the oxidizing agent) and contains impurities, such as small char particles, ash, tars, and oils. The solid residue will consist of ash (composed principally of the oxides of Ca, K, Na, Mg, and Si) and possibly carbon or char. (more…)
The moisture content of the feedstock affects the gas composition and the energy balance of the process since gasification is an en ...
Air-blown circulating fluidized bed gasifiers are of interest because they produce a good quality, low calorific value (LCV) gas (4 ...
Biomass Storage Biomass storage is required to ensure the continuous operation of the facility. To limit the space required for ...
Gasification is a thermo chemical process that has been exploited for more than a century for converting solid feedstocks to ga ...
A combination of legislation and technology has helped clean up many of the world’s coal-burning plants. Both developed and develop ...
Estimation of the future technical potential of biomass as an energy source is dependent on assumptions with respect to land availability and productivity as well as conversion technologies. With the emergence of energy crops as the major source of biomass fuel, land use conflicts, especially in relation to food production, may arise. However, with efficient agricultural practices, plantations and crops could supply a large proportion of energy needs, with residues playing a smaller role without compromising food production or further intensifying agricultural practices. (more…)
The future development of energy crops, to the level at which they would replace residues as the major bioenergy fuel source, will ...
Bioenergy produced from biomass is sometimes called a carbon-neutral energy source, because the same quantity of carbon released wh ...
The quantification of the actual reduction in green house gases sourcess emissions resulting from the substitution of fossil fu ...
To date, most discussion and research relating to the various of biomass role in mitigating CO2 emissions has been focused around i ...
Over the last decade, the number of countries researching the potential of biomass and bioenergy for energy services rose rapid ...
Fossil fuels, had a broader impact in current society, still oil is the one that have far reaching effect. Oil, in all its forms is the fuel that every modern means possible and draw goods and people moving around the world. After the crude oil refined products widespread use all over the world, United States, (more…)
Not surprisingly, most Energy Research and Development takes place in industrialized countries where both the public and private se ...
Government expenditures on energy R&D, energy conservation have risen steadily over the past decade, but only two countries, Japan ...
The global dependence on fossil fuels developed during the Industrial Revolution, two centuries of economic and social development ...
Anyone who wants to save money on gas should be interested in the process of underground coal gasification, or UCG. It is an al ...
Nuclear fission and fusion Research and Development continues to account for nearly half of the total spending by IEA countries, al ...