More than 48% of the raw material fiber used for paper production (chemical pulp or mechanical pulp) in the United States in 2002 was recovered or reclaimed, with recovered paper contributing 37.7% and wood residues 10.6%. The total has been more or less constant, with the percentage of recovered paper increasing and that of wood residues declining recently due to their increased use in oriented strand board and composite panels. Primary fibers are a renewable, domestic resource, much of which is currently supplied by tree plantations. Short-rotation forestry can be used to further increase the productivity of these plantations. (more…)

A combination of legislation and technology has helped clean up many of the world’s coal-burning plants. Both developed and developing countries have adopted increasingly stringent environmental regulations to govern emissions from coal-fired power plants. In the United States, all coal-fired power plants built after 1978 must be equipped with postcombustion cleanup devices to capture pollutants before they escape into the atmosphere. Cyclones, baghouses, and electrostatic precipitators filter out nearly 99% of the particulates. Flue gas scrubbers use a slurry of crushed limestone and water to absorb sulfur oxides from flue gas. The limestone reacts with the sulfur dioxide to form calcium sulfate, which may be used to produce wallboard. Staged combustion and low-NOx burners are used to burn coal to minimize NOx formation. Another strategy, selective catalytic reduction, reacts ammonia with NOx over a catalyst to produce nonpolluting nitrogen and water vapor.

Conventional coal-fired power plants capture pollutants from the flue gas after it leaves the boiler. Circulating fluidized bed (CFB) combustors capture most of the pollutants before they leave the furnace. Crushed coal particles and limestone circulate inside the CFB combustor, suspended by an upward flow of hot air. Sulfur oxides released during combustion are absorbed by the limestone, forming calcium sulfate, which drops to the bottom of the boiler. The CFB combustor operates at a lower temperature (14001F) compared to pulverized coal (PC) boilers (27001F), which also helps reduce the formation of NO x .

Precombustion coal cleaning is another strategy to reduce sulfur emissions by cleaning the coal before it arrives at the power plant. Sulfur in coal is present as pyrite (FeS2 ), which is physically bound to the coal as tiny mineral inclusions, and as ‘‘organic sulfur,’’ which is chemically bound to the carbon and other atoms in coal. Pyrite is removed in a coal preparation plant, where coal is crushed into particles less than 2 inches in size and is washed in a variety of devices that perform gravity-based separations. Clean coal floats to the surface, whereas pyrite and other mineral impurities sink. Additional cleaning may be performed with flotation cells, which separate coal dust from its impurities based on differences in surface properties. Precombustion removal of organic sulfur can be accomplished only by chemical cleaning. So far, coal combustion emissions and chemical cleaning has proved to be too costly, thus flue gas scrubbers are often required to achieve near-complete removal of sulfur pollutants.

The tightening of environmental regulations is likely to continue throughout the world. In the United States, for example, by December 2008, it is anticipated that coal-fired power plants will have to comply with maximum emission levels for mercury. Emissions of mercury and other trace metals, such as selenium, are under increasing scrutiny of coal combustion emissions because of suspected adverse effects on public health.

Coal is sometimes combusted with waste material as a combined waste reduction/electricity production strategy. The disposal of waste from agriculture and forestry (biomass), municipalities, and hospitals becomes costly when landfill space is limited. Some wastes, particularly biomass feedstock, are combustible, but their low energy density (compared with coal) limits their use as an electricity production fuel. Blending coal with these fuels provides an economical method to produce electric power, reduce waste, and decrease coal plant emissions. Most wood wastes, compared to coal, contain less fuel nitrogen and burn at lower temperatures. These characteristics lead to lower NO x formation. In addition, wood contains minimal sulfur ( o 0.1% by weight) and thus reduces the load on scrubbers and decreases scrubber waste biomass.

Numerous electric utilities have demonstrated that 1–8% of woody drying biomass can be blended with coal with no operational problems. Higher blends may also be used, but require burner and feed intake modifications as well as a separate feed system for the waste fuel. Cofiring in fluidized bed boilers may avoid some of these drawbacks, but the economics of co-firing are not yet sufficiently attractive to make it a widespread practice.

In Europe, modern renewable energy sources technologies were explored thoroughly for the first time after the oil embargo/ price crisis of 1973. Notably, market introduction of renewable energy technology started in about 1985, but the renewable energy sources industry has become vital only during the past decade. Accordingly, relevant statistical renewable energy sources data have been systematically compiled only over the past decade, although reliable and consistent statistical renewable energy sources data, collected since 1989, exist for all 15 countries of the European Union and for Western Europe (defined here as the EU-15 plus Switzerland, Norway, and Iceland). (more…)

The accumulation of carbon within a forest growth cycle can be considered in four stages. The initial establishment stage involves low global carbon cycle accumulation and may even experience net carbon loss (particularly from soil) as a result of site preparation and low biomass and bioenergy inputs. A rapid uptake of carbon is then experienced during the second phase, known as the full vigor stage, which subsequently levels off as the stand reaches the mature stage. Finally, the forest reaches old growth and the carbon is in steady state with accumulation associated with new growth balanced by mortality and disturbances. (more…)

To date, most discussion and research relating to the various of biomass role in mitigating CO2 emissions has been focused around its use as a fuel or as a sink. However, full utilization of the potential of biomass products, particularly from woody biomass, may provide significant opportunities. (more…)

Climate change caused by the enhanced greenhouse effect is one of the most significant global environmental issues. Increased emissions of GHG to the atmosphere, most notably CO2 , are considered the main cause of global climate change. Increasing energy consumption, a reliance on fossil fuels to meet these needs, and deforestation related to land use change are the main sources of increasing atmospheric CO2. (more…)

It is of interest to examine potential sources of greenhouse gases sources or atmospheric CO2 by analysis of the global distribution of carbon in all its forms. Atmospheric carbon, which can be assumed to be essentially all in the form of CO2 (i.e., 700 Gt carbon equals 2570 Gt of CO2) comprises only about 1.6% of total global carbon, excluding lithospheric carbon. Obvious greenhouse gases sources of direct or indirect additions of CO2 to the atmosphere are therefore fossil fuel deposits, since portions of them are combusted each year as fuels, and terrestrial biomass. (more…)