Federal Excise Taxes placed on specific energy sources tend to reduce energy demand for these energy sources in both the short and the long run. The federal government imposes excise taxes on almost all petroleum products (including petroleum additives) and coal (see Table 1). The federal government also imposes federal excise taxes on many transportation uses of methanol, ethanol, natural gas, and propane and imposes a fee on electricity produced from nuclear power plants and nuclear power electricity. (more…)
Economists have overwhelmingly favored fuel taxes over fuel economy standards as a means to reduce fuel or gasoline consumption ...
Taxation of energy in the United States, the federal government does not impose an energy tax or a general sales tax that is br ...
Analysis of future light-duty transportation energy use require estimates of the impact of fuel prices on travel and fleet fuel ...
Various provisions in the federal income tax treat energy producers more or less favorably than other businesses. By changing t ...
A number of countries have vehicle tax incentives programs designed to reward purchasers and owners of alternative fuel-efficient v ...
Geographers researching the development of nuclear power have shifted emphasis from commercialization, cost, risk, public acceptance, and power plant siting in the 1950s through the early 1980s to reactor decommissioning and radioactive waste disposal since then. With nuclear power development on hold in most countries, attention has also been given to nuclear weapons facilities and weapons proliferation in an increasingly dangerous world. (more…)
Nuclear fission and fusion Research and Development continues to account for nearly half of the total spending by IEA countries, al ...
Sir Arthur Eddington’s general address on subatomic energy at the 1930 World Power Conference in Berlin stirred the imagination of ...
Although technology change (usually involving an improvement in energy efficiency) is not inherently a geographic process, it does ...
World energy use has increased steadily over the past several decades. Much of the growth in world energy consumption has been ...
Renewable energy sources cannot run out and causes so little damage to the environment that its use does not need to be restric ...
Reductions in carbon intensity, C/E, the carbon emitted per unit of energy generated, reflect the degree to which societies decarbonize their energy sources. The long-term trend has been a shift from coal to oil to natural gas––hydrocarbons with decreasing C/H ratios emitting progressively less CO2 per joule. However, the increasing use of clean low-carbon fuels is not sustainable without somehow disposing of excess carbon because it opposes the trend in the abundance of fossil fuels, with coal resources being the most abundant followed by oil and gas. (more…)
The global cycling of carbon involves both biological and physical processes. Only the biological components are discussed here. Pl ...
The flux of carbon among terrestrial, aquatic, and atmospheric pools is at least partially controlled by photosynthetic process ...
It is of interest to examine potential sources of greenhouse gases sources or atmospheric CO2 by analysis of the global distrib ...
Climate change caused by the enhanced greenhouse effect is one of the most significant global environmental issues. Increased emiss ...
The global carbon cycle involves both biological and physical processes. Only the biological components are discussed here. Pla ...
The global dependence on fossil fuels developed during the Industrial Revolution, two centuries of economic and social development that transformed the way modern humans work and live. Most historians agree that the Industrial Revolution began in the early 1700s in Great Britain when machinery began to replace manual labor and animal power, and fossil fuels replaced wind, water, and wood as main energy sources. Before this period in history, humans manufactured goods by hand or using very simple machines, and most people worked at their homes, which were typically located in rural areas. (more…)
Fossil fuels, had a broader impact in current society, still oil is the one that have far reaching effect. Oil, in all its forms is ...
The leading automotive brands are being focused to produce electric vehicles because they believe they represent a harmony to the e ...
From prehistory until the Industrial Revolution, most energy sources used by humans were localized (i.e., available within 5–10 mil ...
Tanker transportation and oil transport functions as an important link to facilitate the flow of oil and products from their li ...
Gasoline is used mainly by cars, motorcycles, and light trucks; diesel is used mainly by heavier trucks, buses, and trains. Togethe ...
Before the passage of regulations dictating mined land reclamation and mine water discharge standards, streams and rivers down-gradient of mine sites were often contaminated with high levels of suspended and dissolved solids. In the eastern United States, Acid Mine Drainage was also a major problem. Nowadays, streams and rivers near active mine sites have much less of an impact. Sediment ponds are constructed to collect suspended solids and if the mine water does not meet regulations, chemicals [typically lime, Ca(OH) 3 ] are added to neutralize acidity and precipitate dissolved metals. (more…)
Currently, site reclamation is planned for during the permitting process and is incorporated into the mining operation. However, th ...
Historically, mining companies have extracted the earth’s resources wherever economics made it feasible, secure in their knowledge ...
Although underground coal mines operations are not as visible as surface mining, their overall environmental impact can be greater ...
Solar energy desalination is a method by which the sun’s energy is used to desalinate brackish or seawater to produce fresh drinkab ...
Acid deposition and the associated particulate nitrates and sulfates are implicated in the deterioration of certain sensitive e ...
Fuel cells are typically classified according to type of electrolyte. While many varieties of fuel cells have been demonstrated in the laboratory, five major types are seeing development for commercial applications:
* Polymer electrolyte membrane (PEM) cells use a plastic (polymer) membrane that becomes electrically conducting when hydrated (saturated with water); they operate near 1001C.
* Alkaline fuel cells use a caustic electrolyte such as potassium hydroxide (KOH); they also operate near 1001C. (more…)
Transport applications tend to demand rapid start-up and instant dynamic response from fuel cell systems, so a high-temperature ...
Polymer Electrolyte Fuel Cells have high-power density, rapid startup, and low-temperature operation (around 80 to 120 C), and ...
Alkaline fuel cell, often known as the Bacon fuel cell following the British inventor’ name. It has become the most created fue ...
The fuel cell can trace its roots back to the 1800s when a Welsh-born, Oxford-educated barrister, Sir William Robert Grove, realize ...
A fuel cell is an electrochemical device that combines hydrogen with oxygen to generate electricity, heat and water to produce. ...
Energy exists in many forms. Some of energy forms are simple to use and identify as energy. But other forms of energy can not be seen until the energy released. Some forms of energy like light and sound, they carry energy from one place to another. There are also vibrating objects that carry the kinetic energy that makes the sound. The energy passes through the wave where the wave was originated. The higher the wave, it gives more energy. Light is also one form of energy. A light beam or light ray brings out energy from where there was light. This energy is often referred to as radiation energy. (more…)
Electricity generation through nuclear power plant is an enormously complex technical feat. It takes the combined skills of geo ...
Like solar radiation, the ocean is another widely available and distributed energy source. The energy in the ocean is in part k ...
Heat has a enormous influence in our daily lives. Heat quantity exposed in our live has related to the foods we eat, the temper ...
Several molecular systems have been constructed that mimic various aspects of photosynthesis. Two of these utilize molecular system ...
The energy that people use every day comes from many different sources. The resources are divided into two main groups: renewa ...
The energy that people use every day comes from many different sources. The resources are divided into two main groups: renewable energy and nonrenewable energy. Renewable energy sources are those that can be used again and again. Renewable energy resources have unlimited supply. (more…)
In Europe, modern renewable energy sources technologies were explored thoroughly for the first time after the oil embargo/ price cr ...
During the US Presidential Election 2008 Campaign, the renewable portfolio standard was one of the main agendas for Presidentia ...
The broad range of home solar energy systems are mostly known as Photovoltaic Systems (PV) or Thin Film Solar Technology. The s ...
The hydrogen can come from various sources including fossil fuels, wind, solar, biomass, nuclear, solar thermo-chemical reactio ...
Renewable energy sources cannot run out and causes so little damage to the environment that its use does not need to be restric ...
The solar technology is not only in the flat solar collector or photovoltaic panel. I follow the process ID and proof of this is the prototype plant to produce solar electricity. (more…)
In today's day and age there are millions of people who generate their own green energy at home by learning how to build windmills ...
Many people are concerned about their rising energy bills and want to do something about reducing the cost of energy at home. There ...
So you're finally tired of those exorbitant electricity bills, or, you're catching onto a "greener" way of life. Either way, solar ...
Solar distillation is the process in which solar heat is used to purify water from an impure water source by evaporation and conden ...
So-called thin-film photovoltaic devices are usually based on mixtures of elements other than silicon — most notably copper ind ...
” class=”index-image” width=”120″ />
Fuel cells are direct energy conversion devices that combine two reactants to produce electrical power. The reactants are typically a fuel such as hydrogen fuel cells, or methanol, and oxygen from the air. Fuel cells require an electrolyte capable of passing an ionic charge carrier across an electronic conduction barrier where the ions are driven by a concentration gradient. Fuel cells also need a catalytic-based anode and cathode for reactant preparation. For mesoscale/ microscale systems, fuel cells are best fabricated in thin film form. Depending on the desired power output of the system, the ‘‘footprint’’ may well be relatively large to supply the required power. (more…)
Fuel cells are typically classified according to type of electrolyte. While many varieties of fuel cells have been demonstrated ...
Polymer Electrolyte Fuel Cells have high-power density, rapid startup, and low-temperature operation (around 80 to 120 C), and ...
The fuel cell can trace its roots back to the 1800s when a Welsh-born, Oxford-educated barrister, Sir William Robert Grove, realize ...
Microtechnology-Based Energy and Chemical Systems will most likely employ combustion for driving processes such as vapor generation ...
Numerous other parts are needed for a complete fuel cell engine suitable for motor vehicles. These auxiliary components include man ...